Contract / Temp to Direct / Direct Hire: Temp to Direct
Country: United States
Zip or Postal Code: 66547
1st shift General Maintenance Technician III in Wamego, KS! Typical work schedule is Monday – Friday, 6:30am - 3:00pm; hours may vary based on business demand.
The General Maintenance Technician III is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive maintenance on the facilities equipment, fixtures and systems in an industrial environment.
This is a general maintenance position that may assist specialized technicians and requires the ability to understand and work safely around 480v 3-phase electrical power circuits. Must have the ability to diagnose and troubleshoot pneumatic, hydraulic, and electrical systems.
Performs all aspects of preventive and corrective maintenance on facility-related systems including, but not limited to: conveyor and/or R.O. systems; overhead cranes; doors, docks and levelers; ventilation equipment; rooftop HVAC equipment; pumps and motors; restroom and sewer systems; and water systems. May perform welding and fabrication, including building custom fixtures, fabricating brackets, and fabricating maintenance parts or “one off” production / process parts. Performs maintenance on various welders as needed.
In addition, general maintenance tasks related to wall and floor coverings; windows and window hardware; doors and door hardware; office furniture; etc. will be required. The General Maintenance Technician III will document and input all data on PMs and repairs into a CMMS.
•Performs industrial and commercial lighting system repairs.
•Troubleshoots and repairs conveyor systems, R/O systems and overhead cranes.
•Troubleshoots and repairs dock locks and levelers.
•Troubleshoots and repairs pumps, piping, seals and valves.
•Diagnoses, troubleshoots, maintains, and repairs heating and ventilation equipment, including VAV and AHU systems.
•Performs maintenance on various industrial welding machines as needed.
•Performs office furniture, window, door and hardware repairs. Repairs floor and wall coverings.
•Assembles and installs shelving and cabinets.
•Maintains and repairs facility structures, walk ways, and road ways.
•Safely operates fork lift equipment, hoists and cranes.
•Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS).
•Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards.
•Recommends measures to improve maintenance methods and equipment performance.
•Analyzes and resolves work problems, or assists workers in solving work problems.
•Understands company policies and enforces safety regulations.
•Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required.
•Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions.
•Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
•Other duties as assigned by Manager or Supervisor.
•We run our own crews of Production Maintenance Techs, CNC Service Techs, Automation Techs, Industrial Electricians, Maintenance Mechanics, Industrial HVAC Techs, Planner/ Schedulers, Supervisors and safety professionals inside our customers’ facilities to keep their infrastructure operating smoothly.
1.High school diploma or demonstrated equivalent.
2.Three years of experience maintaining buildings, facilities, or equipment in an industrial environment, or demonstrated equivalent combination of education and experience.
3.Must have a valid driver’s license
4.Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher.
•Qualified applicants who are offered a position must pass a pre-employment substance abuse test.
•This position does not include sponsorship for United States work authorization.
•This position will require the ability to obtain a security access badge at our client’s location.
•This position may require various shifts, weekends, and alternative work schedules.
•Requires the ability to regularly lift up to 50 lbs.
•Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.
•Requires the flexibility to bend/stoop, squat repetitive during shift.
•Requires the ability to regularly kneel repetitive for shift.
•Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.
•Requires the ability to stretch/reach on a repetitive basis for shift.
•Requires the ability to walk extensively throughout the plant during shift.
•Requires the use of a Company/Client approved utility knife.
•Requires the ability to differentiate colors pertaining to wire color-coding.
•Some tasks will require repetitive wrist movement.
•Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.
•Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed.
•Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained
1.Associates Degree in Industrial Electrical, Industrial Technology, HVAC, Welding or related skilled trade program.
2.Experience operating and/or maintaining MIG, TIG and/or arc welders.
3.Experience repairing industrial/commercial lighting and controls.
4.Experience troubleshooting, repairing and working safely with 480v 3 phase electrical components.
5.Basic understanding of PLC’s and ladder logic.
6.Experience diagnosing, troubleshooting and repairing facility mechanical systems such as HVAC, conveyors, and R.O. systems to OEM specifications.
7.Experience diagnosing, troubleshooting, and repairing machinery and equipment such as pumps, motors, gearboxes, supply and exhaust fans, power transmission components, steam components up to 100 psi, cranes and hoists, systems, hydraulic and pneumatic systems, etc.
8.Experience performing work on overhead doors and service doors.
9.Experience with maintaining basic plumbing needs.
•Must be willing to work overtime when required. May be required to work holidays and weekends
51 page view(s)
Thinking about applying for this position?
Please make sure that you meet the minimum requirements indicated for the job before you apply (see user agreement). If you are qualified, then use either the email link (near top of post) or the application link (near bottom of post) to apply, whichever is provided.
© Copyright - Roadtechs®, LLC. All rights reserved. No reproduction of any part of this website may be sold or
distributed for commercial gain nor shall it be modified or incorporated in any other work, publication, or website.
Use of this site implies compliance with the Roadtechs User Agreement.