Roadtechs.com

This is the HotSheet for Mechanic jobs posted today (before 4:20 pm on April 9, 2020) on Roadtechs.com. Click on the job title to view the entire post at Roadtechs.com. To apply, look for the email or application link in the body of the Roadtechs.com job post.



  1. Manufacturing Job Board [$$$] [Mechanic] Pump Repair Mechanic - 2nd Shift - Flowserve April 09, 2020 at 14:44:37
    Location: Rancho Dominguez California United States
    Job Type: Direct Hire
    The Pump Repair Mechanic dismantles, repairs, and re-assembles high energy, multi-stage pumps used in industrial settings, such as refineries, chemical processing, and power plants. Our shop is in constant motion, with tight deadlines, challenging mechanical problems, and a customer-focused crew. RESPONSIBILITIES AND REQUIREMENTS • Dismantle pumps and decoking equipment following safety procedures, using torches and liquid nitrogen as needed Inspect pumps and equipment, checking dimensions of c...

  2. General Construction Job Board [$$$] [Millwright] Mechanical Millwright ($25 p/h + $70 p/d pd) 60+ hours per week Utah - ITS April 09, 2020 at 14:13:45
    Location: Salt Lake City, Ut Utah United States
    Job Type: Contract
    Job Description Needed: Mechanical Millwrights in Salt Lake City, UT $25-$30 p/h + $70 per day per diem offered if qualifications are met 60+ Hours per week Mechanical Millwright Duties and Responsibilities: Install, assemble and preform maintenance on conveyor systems Read and Work from Blueprints Must have valid UT driver’s license Work flexible hours and days as needed (including weekends and holidays) Maintenance (Machine Assembly of nuts/bolts, pneumatic, hydraulics, etc.) Millwright (Riggi...

  3. General Construction Job Board [$$$] [Sheet Metal Mechanic] Sheet Metal/Duct Mechanic - NCW April 09, 2020 at 13:39:16
    NCW is currently seeking traveling sheet metal/duct mechanic for commercial projects. Pay BOE with per diem. NCW offers full benefits (Health Insurance, 401 K, Paid Holidays). The requirements for these positions are as followed: - Minimum 5 years Commercial and/or Industrial experience - Current Aerial Lift Certification is preferred, but not required - Current OSHA 10 certification is preferred, but not required - Must be able to pass a drug test - Must have reliable transportation with a vali...

  4. General Construction Job Board [$$$] [Sheet Metal Mechanic] Sheet Metal Installers- Tennessee - NCW April 09, 2020 at 10:59:47
    Job Type: Contract
    NCW is looking for Sheet Metal Mechanics to hang duct in an office building in Tennessee Project be working five 10's and an 8 for at least a month. Pay is $25 and $75 DOE Send resume to jpupp@teamncw.com...

  5. Manufacturing Job Board [$$$] Maintenance Mechanic (7158479) - Aerotek April 09, 2020 at 10:40:01
    Location: Fairfield California United States
    Job Type: Direct Hire
    Maintaining in-depth knowledge of entire plant infrastructure, facilities, production processes, equipment systems in order to effectively perform maintenance.Maintaining expert-level knowledge in multiple technologies, including but not limited to: electrical, welding, PLC, hydraulics, refrigeration, robotics and mechanics.Updating and monitoring preventative maintenance program for the Fairfield plant facility.Assisting in troubleshooting as needed on plant equipment. Performing needed repairs...

  6. Manufacturing Job Board [$$$] Trailer Mechanic (7158393) - Aerotek April 09, 2020 at 10:40:01
    Location: Jeffersonville, In Indiana United States
    Job Type: Direct Hire
    Are you a skilled Trailer Mechanic looking for a large company with room to grow. Very little mandatory OT required, and a company where work life balance is very important. Look no further and apply now! Call 812-258-6656 and leave a message to speed up the process. Our client is one of the leading trailer manufacturers in the U.S and business is booming! Get in while you can! Job Duties Conduct service work as needed for the trailer repair services Repair, fabricate, rebuilding, and replace...

  7. Manufacturing Job Board [$$$] Mechanical Assembler (7157589) - Aerotek April 09, 2020 at 03:40:02
    Location: Hobart Indiana United States
    Job Type: Direct Hire
    Any Assembly experience or mechanical inclination will work. MUST BE ABLE TO READ TAPE MEASURE! -Using hand, power, air/ pneumatic tools to assemble basic sub stations for conveyor systems-Using tape measure (be able to take accurate measurement up to 16th of an inch)-Following blueprints/schematics-Once a task is mastered, will move on to a more complicated build-Keeping work stations organized80% of their day will be spent on the tables assembling beds and conveyors using blueprints10% will ...

  8. Manufacturing Job Board [$$$] Mechanical Assembler (7157671) - Aerotek April 09, 2020 at 03:40:02
    Location: Sandusky Ohio United States
    Job Type: Contract
    ATTENTION ALL ASSEMBLERS, BUILDERS AND MECHANICALLY INCLINED INDIVIDUALS **This company is labeled as "ESSENTIAL" and will remain up and running at full capacity during Covid-19! Looking for people ASAP! If interested please contact Dominic at 216-573-5573 or email your resume to dlombardo @ aerotek.com 1st shift: 7:00 - 3:30pm Pay: $15.50/hr Job Description: * Assemble company products such as industrial conveyors and ovens* Follow written work instructions and complete required quali...

  9. Manufacturing Job Board [$$$] Maintenance Mechanic (7158056) - Aerotek April 09, 2020 at 03:40:02
    Location: Baltimore Maryland United States
    Job Type: Direct Hire
    Looking to start candidates no later than 5/1 Urgent demand TITLE Maintenance Mechanic /Technician SHIFT Openings across 1st, 2nd, and 3rd COMPENSATION 25-35/hr depending on experience and electrical ability LOCATION Baltimore, Md JOB DESCRIPTION This is a lead position that will require leadership and helping less experienced maintenance mechanics/technicians. Maintain and troubleshoot all conveyor systems, electrical and mechanical Develop training plans for service technicians Develop Preve...

  10. Manufacturing Job Board [$$$] Maintenance Mechanic (7157878) - Aerotek April 09, 2020 at 03:40:02
    Location: Saint Petersburg Florida United States
    Job Type: Direct Hire
    Immediately Hiring Maintenance Mechanics! Great starting pay, with pay increases after 90 and 180 days. Direct hire with the company, and benefits within 30 days. Climate controlled, clean environment. Job Duties: Perform preventative maintenance Develop, fabricate, and install minor hardware on production systems Debug new equipment Make necessary repairs and adjustments to machines and systems Perform changeovers and setups on Automatic Inspection Systems Able to setup, maintain and repair ...

  11. Manufacturing Job Board [$$$] maintenance mechanic (7157829) - Aerotek April 09, 2020 at 03:40:02
    Location: Fresno California United States
    Job Type: Contract
    Maintenance Technician Pay: $18 - $29 Shift: Vary depending on needs Description: Maintenance Mechanic/Electrician will be working on the bottling line. Replacing/repairing motors, troubleshooting electrical issues including PLC and VFD's. Qualifications: 5 years of maintenance technician experience. Experience with PLC's, VFD's, single and 3 phase motors, blueprints, and schematics. About Aerotek: We know that a company's success starts with its employ...

  12. Manufacturing Job Board [$$$] Maintenance Mechanic (7157641) - Aerotek April 09, 2020 at 03:40:02
    Location: Coppell Texas United States
    Job Type: Contract
    Responsibility include: Repair and Preventive Maintenance of Production Equipment. Troubleshooting Electrical and Mechanical Equipment such as VFD, Motors, Gear Boxes, Conveyors, Pallet Wrappers, Case Erectors and Case Sealers. Work with pneumatic valve and cylinders. Follow diagram, schematic, sketches, Equipment manual and manufacturer's instructions, malfunctions PLC troubleshooting. Maintains safe and clean working environment by complying with procedures, rules, and regulations.Candida...

  13. Aerospace / Aircraft Job Board [$$$] A great Mechanical/Electrical assembler Opp in El Cajon! (7157490) - Aerotek April 09, 2020 at 03:40:02
    Location: San Diego California United States
    Job Type: Contract
    A great company in el cajon that deals with underwater aerospace parts! A first shift position with with OT! The job duties consist of: Manufacture electrical connectors and cable assemblies. Follow work instructions. Read and interpret blueprints and schematics. Assemble using hand tools May carry up to 50lbs Inspect product before sending it to next dept. The job qualifications are: 1+ year of assembly experience Experience reading blueprints Experience crimping, harnessing, wires Sol...

  14. Manufacturing Job Board [$$$] Mechanical Assembler (7158052) - Aerotek April 09, 2020 at 03:40:02
    Location: Plymouth Minnesota United States
    Job Type: Direct Hire
    Now Hiring Mechanical Assemblers for a company in Plymouth! 1st shift! Great company with Great Benefits! Job Description: Assembling various medical cabinet equipment Candidates will be using various hand tools and power tools Candidates could be doing any stage throughout the process including packaging and assembly Depending on experience, you could start in higher level positions. Qualifications: 0-6+ months Experience of Mechanical Assembly Ability to read a tape measure Experience...


Legend:
Nuclear Job Board Nuclear Job Board
Petro-Chem / Fossil / OffShore Job Board Petro-Chem / Fossil / OffShore Job Board
Alternative Energy Job Board Alternative Energy Job Board
Electric Transmission and Distribution Job Board Electric Transmission and Distribution
General Construction Job Board General Construction Job Board
Homeland Sec / DoD / Fed Gov Job Board Homeland Sec / DoD / Fed Gov Job Board
Shipyard / Marine Job Board Shipyard / Marine Job Board
Computers / Software / Networks / Telecom Job Board Computers / Software / Networks / Telecom Job Board
Aerospace / Aircraft Job Board Aerospace / Aircraft Job Board
Overseas Job Board Overseas Job Board
Medical / Pharmaceutical Job Board Medical / Pharmaceutical Job Board
Manufacturing Job Board Manufacturing Job Board

Thinking about applying for a job opening?
Please make sure that you meet the minimum requirements indicated for the job before you apply (see user agreement). If you are qualified, then use either the email link (near top of the Roadtechs.com job post) or the application link (near bottom of Roadtechs.com job post) to apply, whichever is provided.

To subscribe: send an email to mechanic-join@roadtechs.com using the email account (address) you want the HotSheet sent to. You will receive a confirmation email and you must send a reply to confirm that you want to join the list (this keeps other people from signing you up).

To unsubscribe (opt-out): send an email to mechanic-leave@roadtechs.com using the email account (address) that the HotSheet is currently being sent to. You will receive a confirmation email and you must send a reply to confirm that you want to leave the list (this keeps other people from unsubscribing you).


© Copyright - Roadtechs®, LLC. All rights reserved.