home >> nuclear >> job board >> post

[Controls Engineer] Control Systems Engineer

[ Back ] [ The Roadtechs Nuclear Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


E2 Consulting Engineers, Inc. (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence.

The Pueblo Chemical Agent-Destruction Pilot Plant (PCAPP) will safely destroy 2,611 tons of mustard agent in mortar rounds and artillery projectiles stored at the U.S. Army Pueblo Chemical Depot (PCD) approximately 25 miles from Pueblo, Colorado. Neutralization followed by biotreatment is the technology selected by the Department of Defense to destroy the Pueblo chemical weapons stockpile. The PCAPP plant began the operations and munition destruction phase as of September 2016.

Candidates for unescorted access to the Chemical Limited Area must successfully clear National Agency Check with Local Check (NACLC). All employees are subject and agree to random drug and alcohol testing as a condition of employment. Must be physically fit and able to work safely at an operating plant. Eligible applicants must be a US Citizen and successfully go through a government screening process. Based on project goals and objectives, candidates established within our local community are desirable.

Role Overview

The Pueblo Chemical Agent-Destruction Pilot Plant (PCAPP) is looking for a Senior Control Systems Engineer at the Pueblo, CO location. This position will report to the Automation Supervisor/Lead for the PCAPP Static Detonation Chamber (SDC) project. The purpose of this position is to provide Automation support needed for safe, compliant operations of the SDCs. Senior Controls Systems Engineer reviews and coordinates documents with suppliers, other disciplines, and customers. Coordinates technical issues with Startup & Commissioning and provides assistance to Construction in the field. Proficient with basic engineering deliverables such as drawings, specifications, and Distributed Control System (DCS)/ Programmable Logic Controller (PLC) configurations. Proficient with the development of Human-Machine Interfaces (HMI) and the development of Control Strategies. Proficient with process control algorithms and proficient with Siemens Control Systems, WinCC, and other DCS/PLC database programs. Knowledgeable of major regulations and industry codes and standards applicable to instrumentation and controls. Properly interprets and applies codes & standards and customer design requirements in the preparation of Control Systems design products.

This is a long-term assignment. This position will operate on a DuPont shift based working schedule (up to 12 hours at a time, rotating day and night shifts).

Job Duties and Responsibilities

Review Piping & Instrument Diagrams and Logic Diagrams for control and instrumentation software requirements
Prepare configuration documents to implement the software requirements, and conduct test plans to validate implemented software
Contributes to maintaining the projectís instrument database using automated tools and has knowledge of the applicability of information to be populated in the instrument database
Achieves work process improvement and promotes continuous work process improvement
Champions nonproprietary electronic data interchange and integrate automation technology wherever practical
Demonstrates leadership qualities with emphasis on continuous improvement and team building, and interpersonal communication skills
Basic Qualifications:
BS degree in one of the following: Mechanical, Electrical, Chemical, Computer or Electro-Mech engineering from an accredited institution with at least 9 years of relevant engineering experience
In lieu of a degree, must possess at least 25 years of relevant engineering experience
Must be a US citizen (Dual citizenship will be subjected to projectís approval).
Must be able to obtain and maintain any security clearances required for this position according to Army Regulation 50-6 (Chemical Surety) *
Must be able to obtain an EIT or PE Certification within 12 months of hire
Minimum Qualifications:
Must be physically fit and able to work safely at a construction site
Programmable Logic Controller (PLC) configurations experience along with experience integrating PLCs into a DCS system
Working knowledge of VISIO CADD and/or PDS 2D
Must be able to obtain a DODI 8570.01-M IAT I, or III certification within 6 months of employment.

Qualifications and Experience

Preferred Qualifications:

Programming experience in Siemens control systems, WinCC, OPC programming, and Rockwell RS 5000 logic Version 18 and under.
ISA 84 Safety Systems design experience
Experience with Agent Monitoring, Electronic Security and operations Closed-Circuit TV (CCTV) systems
This project is subject to the Army Regulations (AR50-6 Chemical Surety) which governs persons performing work under the Chemical Personnel Reliability Program (CPRP) and Unescorted Access Program (UAP). Depending on the work performed and the access granted a government security investigation and other physical requirements such as respirators may be mandated. Eligibility to be placed in a CPRP or UAP position requires US citizenship.
This position is designated as an Unescorted Access Position (UAP). As a condition of employment, candidates and incumbents must favorably complete a series of screenings included but not limited to: a personnel security investigation, urinalysis testing, respiratory screening and must meet and maintain personnel suitability and reliability requirements established by Army Regulations.

In accordance with Bechtel's duty to provide and maintain a safe workplace for our employees and to safeguard the health of our families, customers, and visitors, we have adopted mandatory COVID-19 safety protocols for each work location, which may include a vaccination or testing requirement.

E2 Consulting Engineers, Inc. offers an excellent benefits package including health, dental, vision, and life insurance, 401(k) with employer match, paid time off.

$67.00 - $81.00 per hour

Work Environment

This job operates in a professional office environment and uses standard office equipment such as computers and phones.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Ability to sit/ stand for up to 8 hours per day.
Ability to move freely for up to 8 hours per day.

Please no solicitation of any kind from agencies, staffing, or recruiting firms.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.



[ Back ] [ The Roadtechs Nuclear Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


© Copyright - Roadtechs®, LLC. - All rights reserved.
Use of the Roadtechs.com website implies compliance with the Roadtechs User Agreement and acknowledgment of our Privacy Policy.