Experience: The Calibration & Instrument Repair Electrician must have (25) or more years of experience in the electrical field � Industrial, Marine or Commercial Nuclear applications.

Required skills:
- 1. Must have extensive understanding of nuclear plant machinery and auxiliary equipment that supports NAVAL Reactors
- 2. Extensive understanding of the theory and operation of a steam power plant
- 3. Performed detailed work in nuclear propulsion plants and power generation systems
- 4. Comprehensive understanding of a pressurized-water Naval nuclear power plant, including reactor core nuclear principles, heat transfer and fluid systems, plant chemistry and materials, mechanical and electrical systems, and radiological control
- 5. Performed thorough maintenance on the electronic systems that make the nuclear reactor on Navy ships run
- 6. Advanced understanding of shipboard electrical installation drawings, wiring tables, schematics, and work packages.
- 7. Must have an extensive understanding of electrical theory. (i.e. DC, AC, Motors)
- 8. Has expertise knowledge of electrical components and schematic symbols in a system.
- 9. Must be highly competent in reading and utilizing test procedures and work documents.
- 10. Work independently with proper instruction.
- 11. The candidate should have extensive knowledge in and leading a small team of 2 or more employees
- 12. Proficient in using extensive electrical meters and test instruments (volt-ohm meter, clamp-on ammeter, insulation resistance testers, phase rotation tester, meggers, etc.).
- 13. Must be proficient in verify circuit continuity using applicable drawings, meters, and test equipment (e.g wire check phones)
- 14. An intermediate/advanced understanding of a ship�s power distribution system
- 15. Must be knowledgeable in lockout/tag out and hazardous energy control procedures.
- 16. Test and inspect low, medium, and high-voltage cable installations.
- 17. Ability to troubleshoot electrical performance deficiencies (e.g. ground fault, motor circuits, power circuits)
- 18. Proficient in reading schematics and determine the cause of the fault in the system drawings and components.
- 19. Proficient in the use of extensive electrician hand tools (i.e. Pliers, wrenches, sockets, screwdrivers, connector crimping tools, etc.)
- 20. Physically able to climb vertical and inclined stairs and ladders, crawl, bend, stoop, work at heights, and work in confined spaces.
- 21. Able to obtain a clearance (Secret/Confidential)

Required Safety Training / Qualifications:
Leased Labor Provider Company (LLPC) shall provide employees who have completed the following safety training and /or medical clearance. Leased Labor Provider Company shall provide documentation (copy of training, records, medical clearances, etc.) on Company Letterhead to Newport News Environmental, Health and Safety Department (O27) for review and approval prior to assignment of employees to work at Newport News.

All Personal Protective Equipment (PPE*) is to be provided by the Leased Labor Provider Company. All Personal Protective Equipment provided by the Leased Labor Provider Company shall meet the requirements of OSHA and the American National Standards Institute (ANSI) and /or as specified by Newport News.

1. Confined space trained in accordance with OSHA Standards 29 CFR 1915 Subpart B.
2. Hazard communication trained in accordance with OSHA Standard 29CFR 1915.1200 (1910.1200) (h) � (1) through (3) (iv).
3. Respirator trained and qualified. A Respirator Medical Clearance Examination as required by a Physician. The Respirator Training and Fit Testing will meet the requirements of Standard 29CFR1910.134 and each individual shall be trained in a negative-pressure type respirator, MSA COMFO CLASSIC. Newport News requires the use of a MSA COMFO CLASSIC Respirator only (approximate weight 12 oz.). Daily use of respirator may occur.