ProSidian Consulting, LLC
Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102)
121 Richland Ave E, Aiken, SC 29801, USA
Contract
Compensation: USD 112,000 - USD 120,000 - yearly

Job Description
ProSidian Seeks a Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102) as an Engagement Team Member generally located across the Savannah River Site / Aiken, South Carolina supporting Environmental Management Sector requirements to support an engagement for a liquid waste contractor (Savannah River Remediation [SRMC]) at the Savannah River Site in Aiken, SC, which is owned by the U.S. Department of Energy..

JOB OVERVIEW
Provide services and support as an Engineering Functional Area Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] (CO102) under Labor Category: Construction Discipline Engineer at Savannah River Site / Aiken, South Carolina. Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102) works collaboratively as part of the ProSidian Engagement Team as Exempt personnel. Dedicated Planned Labor Hours (DPLH) of 2080 Straight Time (ST) Estimated Annual Quantity (Hrs. Per Yr.) | 300 Overtime Time (OT) Estimated Annual Quantity (Hrs. Per Yr.). This is a Labor Hour Subcontract or Contract W-2 (IRS-1099) Position, and ProSidian reserves the right to convert to a Full-Time ProSidian-employed W-2 Position. The role(s) are located at Savannah River Site / Aiken, South Carolina with identified Work Site Address (121 Richland Ave E, Aiken, SC 29801, USA) providing Engineering functions working to provide BOA Support Services for multiple department requirement Service Areas (SA) for Savannah River Remediation LLC (The SRMC/LW Contractor) at the U.S. Department of Energy | Savannah River Site (DOE-SRS) in Aiken, SC to support the evolving needs of the organization.

RESPONSIBILITIES AND DUTIES - Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102)

Electrical Engineer - Construction Discipline Engineer [Field Engineer] is responsible for planning and technical oversight of field construction activities within a specified discipline associated with procurement, fabrication, installation, modification, and maintenance of systems and components.

Coordinates with Design agencies to ensure timely issuance of new designs or design changes.
Walks down and reviews designs for constructability, resolves design problems encountered in the field during construction, and meets with Design Engineers to discuss solutions.
Inspects / verifies materials, equipment, and construction workmanship and assures compliance with drawings, specifications, and code requirements.
Coordinates with Quality Control to ensure the installation meets the requirements.
Participates in turnover activities. Supports/ participates in start-up and functional check-out of equipment and systems.
Position requires a thorough understanding of Construction Engineering principles and the ability to apply them to field conditions. Experience in the preparation of computer-based construction work execution plans (work Packages) including job-specific hazards analysis, i.e., Asset Suite and Assisted Hazard Analysis or equivalent

Construction Discipline Engineer Electrical

The position requires the following specific requirements:

Thorough understanding of Construction Electrical Engineering principles and the ability to apply these principles to field conditions
Familiar with the National Electric Code (NEC). Candidate shall be familiar with power distribution, controls, instrumentation, and be capable of reading schematics (motors, pumps, distribution centers, etc.)
Knowledge of SRS-specific electrical guides and standards is a plus
Experienced in radiological work planning and hazard analysis is desirable
Capable of climbing and spending extended periods of time in the field
Capable of obtaining qualification to work in radiological work areas
Position Responsibilities:

DESIGN OUTPUT CONSTRUCTABILITY REVIEWS
Review design output and vendor documents
Field walk-down with design engineers
Verify design constructability including procedure and code compliance
Verify field conditions vs. Design output
Verify material availability
Submit constructability comments
Track comments to resolution
Support project team design review meetings
FIELD MATERIAL TAKE-OFF & PROCUREMENT SUPPORT

Develop/expedite bill of materials (BOM)
Track the progress/status of material delivery
Coordinate delivery of material to the field
Verification of received material vs. Ordered material
WORK EXECUTION PLAN DEVELOPMENT

Walkdowns with craft supervision & support groups.
Develop installation sequence
Generate work instructions
Generate inspection and test records or coordinate with quality control. Understand layout/survey needs and generate layout/survey requests. Generate a hazard analysis for field execution of the construction scope. Support/lead team hazard analysis review meetings
Generate or support the generation of job-specific permits as required:

Lockout/tagout order
Power services utilization permit
Hot work
Asbestos disturbance
Confined space
Radiological
Excavation
Hazardous waste
WORK EXECUTION PLAN REVIEW & APPROVAL

Attend I chair execution plan review meetings.
Develop routing list for hazards analysis approval.
Develop routing list for work plan approval
Coordinate and expedite work package approval, routing, and disposition comments to the work execution plan.
Assemble approved work execution plan
Provide status & update of work execution plan in the SRS work control passport system
WORK EXECUTION FIELD COVERAGE & SUPPORT

Lead pre-job briefings with craft workers
Perform task-ready walk-down with craft supervision
Verify quantities of installed commodities
Coordinate daily field support
Expedite / order material as required
Coordinate material testing
Coordinate and status shop fabrication in support of field execution
Perform field inspections
Identify and coordinate resolution of field installation issues
WORK EXECUTION PLAN CLOSURE

Generate design completion notices
Ensure accuracy of work execution plan status
Close all required permits
Close work execution plan documentation
Qualifications
Desired Qualifications For Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102) (CO102) Candidates:

Minimum Qualifications: Electrical Engineering Experience as determined by requestor

Bachelor's degree in Electrical Engineering and at least 5 years of practical experience in construction ELECTRICAL field engineering, or Associate's degree in Electrical Engineering and 5-10 years of practical experience in construction Electrical Engineering, or High school diploma and 10+ years of practical experience in construction Electrical Engineering
Working knowledge of discipline-specific codes and standards
Previous experience with generating work execution plans (preferably utilizing the Asset Suite work control system)
Previous experience with generating job hazards analysis
Previous experience performing material take-off and procurement
Minimum Qualifications: Electrical Engineering Experience as determined by requestor

Working knowledge of discipline-specific codes and standards
Previous experience with generating work execution plans (preferably utilizing the Asset Suite work control system)
Previous experience with generating job hazards analysis
Previous experience performing material take off and procurement
Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] - Engineering (CO102) Candidates shall work to support requirements for RFP303194 Construction Discipline Engineer – Electrical (Electrical Engineer / Field Engineer) (Engineering Services) and provide BOA Support Services for multiple department requirement Service Areas (SA) for Savannah River Remediation LLC (The SRMC/LW Contractor) at the U.S. Department of Energy | Savannah River Site (DOE-SRS) in Aiken, SC to support the evolving needs of the organization.

Skills Required

Primarily focused on Electrical Engineer [Construction Discipline Engineer (CDE) – Electrical (Field Engineer)] initiatives and aligned with Program Support activities and Engineering Functional Area Activities.
Construction electrical field engineering;
constructability review; field walkdowns;
NEC/code compliance; electrical schematics;
power distribution; controls; instrumentation;
vendor-document review; material take-offs/BOMs;
procurement expediting; material receipt verification;
work-package/work-execution-plan development;
Asset Suite or equivalent work-control systems;
Assisted Hazard Analysis or equivalent; job hazards analysis; permit planning; inspection/test record generation; layout/survey coordination;
Quality Control coordination; pre-job briefings; task-ready verification;
field inspection; start-up/functional checkout support; turnover;
design issue resolution; work-control passport/status tracking; work-package closure.
Competencies Required

Technical judgment; construction engineering principles; electrical-system knowledge;
Constructability analysis; field problem solving; code/procedure compliance; safety and hazard-analysis discipline;
Work planning and work-control rigor; quality assurance awareness; procurement/material coordination;
Cross-functional coordination with Design, Quality Control, craft supervision, and support groups; Meeting leadership; communication; documentation accuracy; schedule/status management;
Issue resolution; field inspection and verification.
Ancillary Details Of The Role(s):

Work hours: A 40-hour workweek is scheduled. SRR Construction utilizes a 10-hour-per-day, four-days-per-week schedule.
A standard work week is Monday through Thursday, 6:30 am - 5:00 pm. However, alternate schedules could be employed.
Workweek excludes SRR holidays.
Security/Eligibility:

Candidate must be a U.S. citizen.
Candidate must possess a valid driver's license.
Personal vehicles operated by the candidate must be registered.
Personal vehicles operated by the candidate must be insured, with proof of insurance in the vehicle.