Job Search:
 
job board -- all
job board -- jobs only
job board -- add a post
           home >> electric transmission and distribution >> job board >> post


 

SCADA/Configuration and Checkout


Posted by: J. Givoo Consultants <sjohnson@jgivoo.com> on November 26, 2017 at 00:04:01. Click here to reply to this post via Email.Click here for help with email link

Contract / Temp to Direct / Direct Hire: Contract


Coordinate all control point testing with Operations and Field personnel to ensure that these points are functionally correct. It should also be verified that only the appropriate EMS is able to operate a control point when data is shared between systems

Able to review data that comes into the SCADA system from RTUs in the field. This data will be verified with resources in the field to ensure the data is accurate and placed correctly on any display related to that data. Any data point found to be inoperable will be placed in the uncommissioned state per the OTSS Checkout procedure.

Shall be able to identify any display that included data being checked out

Digital and Analog Control Outputs. Resources should understand the significance in configuring and operating SCADA system control points. Operating system control points will be required in not only RTU checkout work but in RTU maintenance and configuration. Operation of these points must be done with care and coordination. Resources will be required to coordinate appropriately with the field personnel and operators to ensure testing of these control point will be done in a safe and controlled fashion. A clear understanding of the facility and its operations where work is being performed is essential to ensuring the system is functionally tested in a safe manor

Resources shall be able to identify and track data being shared between EMSs ( Management Systems; various SCADA systems uses for different functions) and ensure that the data is displayed correctly on each EMS.









      

69 page view(s)



Thinking about applying for this position?
Please make sure that you meet the minimum requirements indicated for the job before you apply (see user agreement). If you are qualified, then use either the email link (near top of post) or the application link (near bottom of post) to apply, whichever is provided.


[ Back ] [ The Roadtechs Electric Transmission and Distribution Job Board ] [ FAQ ] [Edit ] [Mark Position Closed ]

© Copyright - Roadtechs®, LLC. All rights reserved. No reproduction of any part of this website may be sold or
distributed for commercial gain nor shall it be modified or incorporated in any other work, publication, or website.
Use of this site implies compliance with the Roadtechs User Agreement.