City: San Diego
Country: United States
General Job Description:
•Position is full-time temporary to be located at Naval Base Coronado in San Diego California. Project will start on or about February 1, 2018 and will last approximately 12 weeks.
Pay for this position is $40 per hour, overtime after 8 hours per day. There is no-perdiem for this project. Please send resumes to firstname.lastname@example.org
•Position will report directly to the Client Project Manager.
•A minimum of 5 years of relevant construction safety supervision experience is required.
•Ability to commute to and from the jobsite daily is required. Travel expenses will not be allowed.
•Personal vehicle for onsite use is required.
•Travel is not required for this position, and typical work hours are 7:30 a.m. to 4:30 p.m. Regardless, the SSHO must be available for pre-arranged unusual work hours at any hour of the day to supervise onsite project activities.
•Must have completed the OSHA 500 Construction Safety class and be able to provide a certificate of completion. or have CHST or CSP Certification
•Training, experience, and qualifications shall be as required by EM 385-1-1 paragraph 01.A.17, entitled SITE SAFETY AND HEALTH OFFICER (SSHO), and all associaed sub-paragraphs.
•Must meet the requirements of EM 385-1-1 section 1 with the primary responsibility of ensuring the requirements of 29 CFR 1926.16 are met for the project.
•The training requirements for the SSHO must include the successful completion of the course entitled "40 Hour Construction Safety Hazard Awareness Training Course for Contractors” in addition to the qualifications in EM 385-1-1 paragraph 01.A.17. If the SSHO does not have a current certification, they shall obtain the course certification within sixty (60) calendar days from award.
•Excellent written and verbal communication skills are required.
•Proficient computer skills including basic knowledge of Microsoft Word and Excel are required.
Daily Work Tasks and Requirements:
•Conduct daily safety and health inspections and maintain a written log which includes area/operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections.
•Work with the Contractor and Subcontractor Health and Safety persons, supervisors, and management to ensure that any unsafe conditions or unsafe acts are corrected immediately.
•Conduct mishap investigations and complete required reports. Maintain the OSHA Form 300 and Daily Production reports for prime and sub-contractors.
•Maintain applicable safety reference material on the job site.
•Attend the pre-construction conference, pre-work meetings including preparatory inspection meeting, and periodic in-progress meetings.
•Implement and enforce accepted APPS and AHAs.
•Maintain a safety and health deficiency tracking system that monitors outstanding deficiencies until resolution. Post a list of unresolved safety and health deficiencies on the safety bulletin board.
•Ensure sub-contractor compliance with safety and health requirements.
•Maintain a list of hazardous chemicals on site and their material safety data sheets.
•Shall be at the work site at all times when contractors are on site working to implement and administer the contractor's safety program and Government-accepted Accident Prevention Plan.
•Collect, review and file subcontractor Job Safety Analysis (JSA) forms.
•Review and enforce applicable Activity Hazard Analysis (AHA) procedures.
•Maintain worker safety meeting log.
•Stop any unsafe subcontractor work activities and notify Project Manager.
•Coordinate and procure all safety permits required by the project owner’s internal safety office.
•Inform Project Manager and Construction Manager of any identified hazardous conditions or unsafe acts.
•Work with the Project Manager and Construction Manager to identify solutions to current and planned activities which could constitute hazardous activities.
•Attend or hold subcontractor safety meetings with subcontractor foreman.
•Conduct a safety orientation training session for all subcontractors before beginning work on the construction project.
•Visit various subcontractor toolbox meetings to monitor the performance of safety communications on the project.
•Review and ensure Activity Hazard Analysis (AHA) are completed with subcontractors.
•Provide coaching and mentoring to workers and supervisors regarding proactive safety performance.
•Actively participate with construction team and the customer when planning for work activity in new areas.
•Inspect subcontractor owned or leased equipment (i.e. vehicles, lifts, cranes, etc.) when arriving to property.
•Attend project management meetings to cover safety issues, highlight good safety activities, etc.
•Ensure Section 1 of EM385.1.1 is understood, communicated, and strictly adhered to throughout duration of project.
165 page view(s)
Thinking about applying for this position?
Please make sure that you meet the minimum requirements indicated for the job before you apply (see user agreement). If you are qualified, then use either the email link (near top of post) or the application link (near bottom of post) to apply, whichever is provided.
© Copyright - Roadtechs®, LLC. All rights reserved. No reproduction of any part of this website may be sold or
distributed for commercial gain nor shall it be modified or incorporated in any other work, publication, or website.
Use of this site implies compliance with the Roadtechs User Agreement.