home >> manufacturing >> job board >> post

1st Shift Machine Operator $14 Immediate Start!! (7059234)

[ Back ] [ The Roadtechs Manufacturing Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


This individual will be working between the bender and air press machine. When they are at the bender they will be putting metal tubes onto the machine, and then clicking the floor button with their foot. The machine does the bending of the tube for them. They will then take the bent tube off and place it in a box. They can be working with a variety of sized tubes. While they are on the air press machine they will be placing the bent tubes into the machine. The machine will then punch holes into the tube. They then take it out and place it into a box.

JOB DUTIES:
*Lifting the tubes (1 to 20 lbs)
*Placing the tubes into or onto the machine
*Hitting the button to bend the tube or punch holes into it
*Visually inspecting some of the parts to make sure they are made correctly
*Using an air gun to clean off the machine while working

SHIFT:
Monday-Friday 7AM-3:30PM
Overtime is always optional. It fluctuates week to week if it is available. When they do have it they could either stay an hour or so after their shift, or come in for a couple of hours on Saturdays.

BREAKS:
30 minute lunch, and two 10 minute breaks

TRAINING:
In the first week they will be trained by their lead, by the second week they should be up and running on their own. They will continuously train them on other machines so that they are cross-trained.


[ Back ] [ The Roadtechs Manufacturing Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


© Copyright - Roadtechs®, LLC. - All rights reserved.
Use of the Roadtechs.com website implies compliance with the Roadtechs User Agreement and acknowledgment of our Privacy Policy.