home >> nuclear >> job board >> post

Principal Design Specialist (Aiken, SC) 634646

[ Back ] [ The Roadtechs Nuclear Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


Duties/Responsibilities
Provide staff augmentation services to plan, develop, prioritize, coordinate, implement, and complete the process to renew the following Certificates of Authorization for the SRNS pressure relief valve test and repair facilities:
• ASME U – Manufacture of pressure vessels at field sites.
• National Board R – Repair and/or alteration of boilers, pressure vessels, and other pressure-retaining items
• National Board VR – Repair of pressure relief valves

In addition, provide support to obtain a National Board Certificate of Accreditation designating SRNS as a Federal Inspection Agency.

Specific activities include preparation of the formal application for renewal, review of quality system manuals, coordination of on-site assessment meetings and shop visits for demonstrations of capabilities, management briefings, etc.

Technical services shall be provided using processes and procedures identified by the End User. Programmatic guidance will be provided by the End User.

Work Hours:
A 40-hour work week is scheduled. Organization utilizes various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four days per week), and 9/80s (9 hours/day, five days on week A and 4 days on week B). Work week excludes SRNS holidays. Each workday has a 30-minute unpaid lunch.

Area Security Access:
A DOE security clearance is not required for this position.

Education
Associates degree in a technical discipline and at least 12 - 14 years of work experience, or 14 - 18 years of practical work experience

Experience/Skills
• Demonstrated in-depth knowledge of the accreditation/certification process associated with the ASME Boiler and Pressure Code Certificate of Authorization Program and the National Board “R’ and VR” Certificate of Authorization Programs
• Demonstrated working knowledge of National Codes and Standards for the construction, installation, repair, maintenance, and inspection of pressure equipment such as ASME BPV Code Sections and the NBIC and National Board procedures
• Demonstrated previous performance of re-certification audits of pressure relief valve test and repair facilities with the National Board
• Demonstrated previous performance of re-certification audits for facilities using the U-Stamp and R-Stamp
• Demonstrated ability to present results in clear concise written correspondence and documents
• Demonstrated ability to perform field walk-downs of the job site. These walk-downs may involve construction sites with uneven surfaces and work in progress, walking for distances over a half mile, climbing ladders to access remote areas, dressing out in protective clothing and environments where a respirator is required.
• Demonstrated completion of the National Board Authorized Inspector and In-service Inspection courses.
• In-depth knowledge of NB-23, NB-244, NB-263, NB-381, and NB-390 requirements.
• Familiar with the SRNS pressure relief valve test and repair facility program and procedures (Preferred)
• Familiar with the SRNS personnel involved in the management and performance of pressure relief valve test and repair facility activities (Preferred)
• Familiar with the SRNS personnel involved in the management and performance of pressure vessel fabrication and pressure vessel repair (Preferred)


[ Back ] [ The Roadtechs Nuclear Job Board ] [ Help ] [Edit ] [Mark Position Closed ]


© Copyright - Roadtechs®, LLC. - All rights reserved.
Use of the Roadtechs.com website implies compliance with the Roadtechs User Agreement and acknowledgment of our Privacy Policy.